Drawmer 1976 운영자 매뉴얼 - 페이지 11
{카테고리_이름} Drawmer 1976에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drawmer 1976 13 페이지. Stereo 3 band saturation and width processor
페이지 인쇄
IF A FAULT DEVELOPS
For warranty service please call Drawmer Electronics Ltd. or
their nearest authorised service facility, giving full details of
the difficulty.
A list of all main dealers can be found on the Drawmer
webpages.
On receipt of this information, service or shipping instructions
will be forwarded to you.
No equipment should be returned under the warranty without
prior consent from Drawmer or their authorised representative.
For service claims under the warranty agreement a service
Returns Authorisation (RA) number will be issued.
Write this RA number in large letters in a prominent position
on the shipping box. Enclose your name, address, telephone
number, copy of the original sales invoice and a detailed
description of the problem.
Authorised returns should be prepaid and must be insured.
All Drawmer products are packaged in specially designed
containers for protection. If the unit is to be returned, the original
container must be used. If this container is not available, then
the equipment should be packaged in substantial shock-proof
material, capable of withstanding the handling for the transit.
1976
STEREO 3 BAND SATURATION AND WIDTH PROCESSOR
INPUT
Input Impedance
Maximum Input Level
OUTPUT
Output Impedance
Maximum Output Level
FREQUENCY RESPONSE
% DISTORTION (THD & NOISE)
0dB (ref +4)
GENERAL INFORMATION
DATA SPECIFICATION
20k Ohms or greater
+18dBu
<100 Ohms
+21dBu into 10k Ohms Load
20Hz to 20kHz +/-0.2dB
@ 1kHz
0.006%
DRAWMER 1976 O
CONTACTING DRAWMER
Drawmer Electronics Ltd., will be pleased to answer all
ap plic atio n qu estion s to enh an ce you r usag e of this
equipment. Please address correspondence to:
Drawmer (Technical Help line)
Coleman Street
Parkgate
Rotherham
S62 6EL
UK
Alternatively contact us by E-mail on :
Further information on all Drawmer dealers, Authorised service
departments and other contact information can be obtained
from our web pages on:
http://www.drawmer.com
POWER REQUIREMENTS
230Volt or 115V at 50-60hZ, 15VA
FUSE RATING
T160mA for 230Volt,
T315mA for 115Volt
Conforming to IEC 127-2
FUSE TYPE
20mm x 5mm, Class 3 Timed-Blo, 250Volt working
CASE SIZE
482mm (W) x 44mm (H) x 202mm (D)
WEIGHT
2.6Kgs
M
L
PERATOR'S
ANUA
CHAPTER 3
11