Bosch XQG80-WAP201601W 사용 설명서 및 설치 지침 - 페이지 26

{카테고리_이름} Bosch XQG80-WAP201601W에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch XQG80-WAP201601W 36 페이지.

페이지 인쇄

Faults and what to do about them

Faults

Washing machine door

cannot be opened.

Programme does not

start.

Additional function could

not activate for selected

programme.

Water is not drained.

Water not visible in the

drum.

Spin result not satisfac-

tory.

Spin cycle activated sev-

eral times.

Dispenser not completely

rinsed out.

Stain formation in the

washing machine.

Foam is coming out of the

detergent drawer.

Excessive noise, vibra-

tions and wandering dur-

ing spin cycle.

Display panel/indicator

lights do not function

while the appliance is run-

ning.

Programme duration

changes during the wash

cycle.

Cause/Remedy

Safety function active. Stop programme?

■

- - - - (Rinse stop= without final spin) selected?

■

Can be opened via emergency release only. ~ Page 24

■

Childproof lock activated? Deactivate childproof lock. ~ Page 16

■

(Start/Pause) or

■

Washing machine door closed?

■

If the additional function is selectable?

■

- - - -(Rinse stop= without final spin) selected?

■

Clean the drain pump. ~ Page 23

■

Clean outlet pipe and/or drainage hose.

■

Not a fault – water below the visible area.

Wash small and large items of washing together.

■

æ (Less iron) selected?

■

Too low speed selected?

■

Not a fault – unbalanced load detection system adjusts imbalance.

Remove the insert. Clean detergent drawer and re-insert.~ Page 22

■

Run Drum clean 90 °C programme without washing.

Use standard detergent.

Too much detergent used?

Mix 1 tablespoon of fabric conditioner with ½ litre of water and pour into

dispenser II in the detergent drawer.

Reduce detergent dosage for the next wash cycle.

Appliance aligned?

■

Align the appliance. ~ Page 34

Appliance feet fixed?

■

Secure appliance feet. ~ Page 34

Transportation safety devices removed?

■

Remove transportation protection devices. ~ Page 31

Power failure? ~ Page 24

■

Circuit breaker tripped? Reset the circuit breaker /change the fuse.

■

If the fault occurs repeatedly, call the after-sales service.

■

Not a fault – unbalanced load detection system adjusts imbalance by

■

repeatedly distributing the laundry.

Not a fault – foam detection function active. Additional rinse cycle.

■

5 (Finish in) selected?