BD LSR II 사용자 설명서 - 페이지 19

{카테고리_이름} BD LSR II에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BD LSR II 20 페이지. Flow cytometry analyzer
BD LSR II에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

Electrical Safety

Lethal electrical hazards can be present in all lasers, particularly in laser

power supplies. Every portion of the electrical system, including the printed

circuit boards, should be considered to be at a dangerous voltage level.

Avoid potential shock by following these guidelines.

•

Turn off the power switch and unplug the power cord before servicing the

cytometer, unless otherwise noted.

•

Connect the equipment only to an approved power source. Do not use

extension cords. Have an electrician immediately replace any damaged

cords, plugs, or cables. Refer to the BD LSR II Facilities Requirement

Guide for specific information.

•

Do not remove the grounding prong from the power plug. Have a qualified

electrician replace any ungrounded receptacles with properly grounded

receptacles in accordance with the local electrical code.

•

For installation outside the US, use a power transformer or conditioner to

convert the local power source to meet the BD LSR II power requirements

(120 V ±10%, 50/60 Hz). Contact your local BD office for further

information.

Safety and Limitations

xix