Drawmer A2D2 DMS-3 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Drawmer A2D2 DMS-3에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drawmer A2D2 DMS-3 10 페이지. Aes grade 1 dual output analogue to digital converter
페이지 인쇄A2D2 DMS-3 GENERAL INFORMATION
IF A FAULT DEVELOPS
For warranty service please call Drawmer Electronics Ltd. or
their nearest authorised service facility, giving full details of
the difficulty.
A list of all main dealers can be found on the Drawmer
webpages.
On receipt of this information, service or shipping instructions
will be forwarded to you.
No equipment should be returned under the warranty without
prior consent from Drawmer or their authorised representative.
For service claims under the warranty agreement a service
Returns Authorisation (RA) number will be issued.
Write this RA number in large letters in a prominent position
on the shipping box. Enclose your name, address, telephone
number, copy of the original sales invoice and a detailed
description of the problem.
Authorised returns should be prepaid and must be insured.
All Drawmer products are packaged in specially designed
containers for protection. If the unit is to be returned, the original
container must be used. If this container is not available, then
the equipment should be packaged in substantial shock-proof
material, capable of withstanding the handling for the transit.
CONTACTING DRAWMER
Drawmer Electronics Ltd., will be pleased to answer all
application questions to enhance your usage of this
equipment. Please address correspondence to:
Drawmer (Technical Help line)
Coleman Street
Parkgate
Rotherham
S62 6EL
UK
Alternatively contact us by E-mail on :
Further information on all Drawmer dealers, Authorised service
departments and other contact information can be obtained
from our web pages on:
http://www.drawmer.com
8
SPECIFICATION
Analogue Inputs
Frequency Response
Input Level Range for 0dBFs
Crosstalk
Factory Calibration of Presets
THD+Noise
A/D Converter
2 x Temperature Compensated Xtal Oscillators (TCXOs)
AES GRADE 1 Stability,
Tolerance
2 x Stereo Sample
Rate Converters:
2 x AES/EBU Neutrik XLR
2 x S/PDIF Outputs
2 x TOSLink
Bit Depth
Word Clock Outputs
Output impedance
General
Power Supply:
Fuse Rating
Fuse Type
Dimensions:
Weight
CHAPTER 3
Left/Right balanced XLR
(Pin 2 Hot)
20Hz-20kHz +/- 0.1dB
-2.0dBU to +28dBU
-103dBFs @ 1kHz
-84dBFs @ 10kHz
+18dBU = 0dBFs
0dBFs >101 dBFs
-1dBFs >103dBFs
-3dBFs >105dBFs
-6dBFs >107dBFs
-12dBFs >110dBFs
+/-1ppm (0-60 Celcius),
<<+/-1ppm (15-30
Celcius)
full up/down conversion
44.1, 48, 88.2, 96, 176.4,
and 192kHz
Neutrik XLR
Coaxial, RCA Type
JIS F05
24Bit and 16Bit Dither
22.5 ohms giving 4v
pk-pk into 75 ohms
230Volt or 115V at
50-60hZ, 16VA
80mA for 230Volt,
160mA for 115Volt.
CONFORMING TO:
IEC127-2
20mm x 5mm, Class 3
Slow - Blow
250Volt working
1u, 19" Rack Mount,
482mm(W) x 44mm(H) x
145mm(D)
2.213 kg