BD Alaris GW 800 Series 빠른 참조 매뉴얼 - 페이지 7
{카테고리_이름} BD Alaris GW 800 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BD Alaris GW 800 Series 12 페이지. Volumetric pump
페이지 인쇄
User Selectable Options
The pump must be on HOLD. Press
Check the Battery Status
Note:
Only available when Pump is operating on battery power.
Press and hold
for 2 seconds until Battery Status is displayed:
e
,
.
e
Press
button to go to next option.
Selecting the Occlusion Pressure Level (if Enabled)
PrES option is displayed:
s
Selecting the Alarm Volume (if Enabled)
tonE option is displayed:
t
Selecting VTBI / Time Infusion (if Enabled)
CLoc option is displayed:
q
Selecting Micro Mode (if Enabled)
0.0 option is displayed:
r
.
d
• Battery has greater than 30 minutes run time.
• Battery is low and has approximately 30 minutes or less
run time.
• Change occlusion pressure level to high (HI), normal (nor)
or low (lo) using
h
• Press
to confirm and go to next option.
e
• Change alarm volume between 1 and 7* using
• Press
to confirm and go to next option.
e
* 1=Low, 7=High
• Select On or OFF using
infusion** setting on or off.
• Press
to confirm and go to next option.
e
** Ensure TIME indicator is lit, if set to On.
• Select On or OFF using
on or off.
• Press
to confirm.
e
*** Ensure MICRO indicator is lit, if set to On.
0000CF04392 Iss. 1 7/12
/
.
f
/
keys to turn the VTBI/time
h
f
/
keys to turn micro mode***
h
f
/
.
h
f