BD Diesel Performance 1030395 설치 매뉴얼 - 페이지 6
{카테고리_이름} BD Diesel Performance 1030395에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BD Diesel Performance 1030395 19 페이지. Bd torqloc torque convertor control system
페이지 인쇄22 September 2015
+12V
Using a test light or multi-meter, find a key switched +12 Volt power source in the
wiring harness under the dash. Connect the Red wire to it using a black Posi-Tap™
and connect the other end of the Red wire to the +12v terminal on the module.
GND
Connect to any bolt/screw under the dash that is a good ground.
VSS
Locate the VSS (Vehicle Speed Sensor) wire in the vehicles computer wiring
harness (see chart). Run the TorqLoc Green wire to the VSS wire and cut off any
excess, leaving some slack. Connect to the VSS wire using a gray Posi-Tap™, or,
solder the Green wire to the VSS wire and protect it from the elements (i.e. liquid
electrical tape).
2004-2005 Pin 11 at ECM C2 50 pin (Dark Green w/Yellow tracer)
DODGE
1996-2003 Pin 27 at PCM C2 (White w/Orange Tracer)
(5.9L)
1994-1995 Pin 47 on PCM (White w/Orange Tracer)
1995-2003 Pin 58 at ECM (Gray w/Black Tracer)
FORD
(7.3L)
1990-1994 Pin 3 at ECM (Gray w/Black Tracer)
1994-2000
CHEVY
(6.5L)
1992-1993 Light Blue w/Black Tracer at VSS Buffer by ECM
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
TorqLoc# 1030395
#1
TorqLoc power lead (Red wire)
#2
TorqLoc ground (Black wire)
LOCATION OF DODGE CUMMINS ECM & HARNESSES
#3
Vehicle Speed Sensor (Green wire)
Pin 15 (Dark Green) at VSS Buffer beside the ECM
(Behind glove box)
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
6