Bosch Benchmark HBLP451RUC 설치 매뉴얼 - 페이지 19
{카테고리_이름} Bosch Benchmark HBLP451RUC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Benchmark HBLP451RUC 22 페이지. Built-in wall ovens
Bosch Benchmark HBLP451RUC에 대해서도 마찬가지입니다: 사양 (3 페이지), 설치 매뉴얼 (39 페이지), 서비스 매뉴얼 (45 페이지)
페이지 인쇄
Cabinet Dimension Requirements
It is good practice, when an oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall, or cabinet
door, to allow at least 1/4" (6 mm) space between the side
of the oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Junction boxes can be located anywhere within reach of
the oven's power cable, but be aware that the unit should
able to be moved for service.
Dimensions for 27" Single
Oven Units
The cabinet opening must be plumb and the base must be
flat and level and capable of supporting a weight of at least
193 lbs (87 kg).
Single Oven 27" Traditional Installation,
Cabinet and Undercounter
9001065629 Rev A
Single Oven 27" Flush Mount
Installation
Flush installation (wall mount and undercounter) requires
two side cleats to be attached inside the cabinet or counter
frame, recessed from the front.
Dimensions for 27" Double
Oven Units
The cabinet opening must be plumb and the base must be
flat and level and capable of supporting a weight of at least
361 lbs (164 kg).
Double Oven 27" Traditional
Installation
English 15