Bosch CBG675B 1B Series 사용 설명서 - 페이지 27
{카테고리_이름} Bosch CBG675B 1B Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch CBG675B 1B Series 48 페이지.
PDishes
With the "AutoCook" operating mode, you can cook a
D i s h e s
wide range of dishes. The appliance selects most
settings for you automatically.
Information about the programs
The cooking result depends on the quality of the
■
food and the type of cookware. For an optimal
cooking result, use food that is in good condition
and chilled meat only.
The appliance chooses the optimal heating mode
■
and the time and temperature setting for you. You
will only be asked to enter the weight. It is not
possible to set weights outside of the intended
weight range.
When roasting dishes for which the appliance will
■
apply the temperature selection for you,
temperatures of up to 300 °C can be saved.
Therefore, make sure that you use cookware that is
sufficiently heat resistant.
Information is provided, e.g. on cookware, shelf
■
position or the addition of liquid when cooking meat.
Some food requires turning or stirring, etc., during
cooking. This is shown on the display shortly after
operation starts. An audible signal will remind you at
the right time.
Information on the right kind of cookware to use and
■
tips and tricks for the preparation can be found at
the end of the instruction manual.
Cooking a dish with AutoPilot
Using the rotary selector, go through all the dishes to
see which dishes are available with AutoPilot.
Weigh your food before placing it in the cooking
compartment in order to be able to set the correct
weight.
The cooking time is calculated depending on the dish
and the weight, and cannot be changed.
Touch the % field.
1.
The first dish is highlighted white in the display.
Turn the rotary selector to set the required dish.
2.
Touch the a field.
3.
The weight is highlighted white in the display.
Turn the rotary selector to set the weight of your
4.
dish.
The cooking time is calculated automatically.
Confirm using the l Start/Stop button.
5.
A note appears on accessories and shelf position.
Press the l Start/Stop button to start.
6.
The cooking time counts down on the display. The
heating line does not appear for dishes.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating.
When your dish is ready, switch off the appliance using
the ÿ On/Off button.
Continue cooking
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears on the display, which asks if you want
to continue cooking. If you want to continue cooking,
press the l Start/Stop button. A cooking time is
suggested, which can be changed. Press the l Start/
Stop button to start.
You can extend the cooking time as often as
Note:
required.
When you are satisfied with the cooking result, touch
the % field.
Press the ÿ On/Off button to switch off the appliance.
Setting a later end time
You can set a later end time for some dishes. Before
starting the appliance, touch the s field and set a later
end time using the rotary selector.
The appliance switches to standby after it is started. The
end time can no longer be changed.
Changing and cancelling
After starting the appliance, the settings can no longer
be changed.
If you would like to cancel the operation, switch the
appliance off using the ÿ On/Off button. You can no
longer pause the operation using the l Start/Stop
button.
Dishes en
27