Bosch CDG634B.1 사용 설명서 - 페이지 13

{카테고리_이름} Bosch CDG634B.1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch CDG634B.1 36 페이지.

페이지 인쇄
Bosch CDG634B.1 사용 설명서
Pausing the operation
You can also interrupt and then continue an operation
using the l Start/Stop button.
If you press and hold the l Start/Stop button for
approx. 3 seconds, the operation is cancelled and all
settings are reset.
The fan may continue to run after an operation
Note:
has been paused or cancelled.

Filling the water tank

When you open the appliance door, you will see the
water tank on the right-hand side. Before starting the
operation, fill the water tank with water.
Ensure that you have correctly set the water hardness
range. ~ "Basic settings" on page 19
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
uncarbonated mineral water.
Fill the water tank before each use:
Open the appliance door.
1.
Remove the water tank from the water tank recess
2.
(picture
).
!
Fill the water tank with cold water up to the "max."
3.
mark. (Picture
).
"
Close the tank cover
4.
until you feel it engage.
Insert the filled water tank (picture
5.
Check whether the water tank is pushed in flush with
6.
the water tank recess (picture
Close the appliance
7.
door.
The water tank has been filled. You can now start the
operation.
EURO Appliances - euappliances.info
).
#
).
$
Refilling the water tank
If the water tank is empty, the prompt to fill the water
tank appears on the display. The operation is stopped.
Carefully open the appliance door.
1.
Remove the water tank and fill it.
2.
Slide the water tank back in and close the appliance
3.
door.
Start the operation.
4.
The operation continues.

Setting the type of heating and temperature

Example in the picture: 15 minutes steaming S at
90 °C.
Touch a type of heating on the left of the field.
1.
The temperature is highlighted in white in the
display.
Use the rotary selector to set the temperature.
2.
Touch the s field.
3.
The cooking time is highlighted in white in the
display.
Turn the rotary selector to set the cooking time.
4.
Press the l Start/Stop button to start.
5.
The appliance begins to heat up.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Operating the appliance en
13