AirStage UTY-RNK Series 운영 매뉴얼 - 페이지 4

{카테고리_이름} AirStage UTY-RNK Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AirStage UTY-RNK Series 13 페이지. Air conditioner remote controller wired type

페이지 인쇄

OPERATION

To set the operation mode

● Economy setting

● Vertical air direction adjustment (Swing operation/Louvre position)

● Horizontal air direction adjustment (Swing operation/Louvre position)

NOTES

(1) • Always use the remote controller's AIRFLOW DIRECTION

button. Attempting to move the air direction louvers

manually could result in improper operation; in this case,

stop operation and restart.

The louver should begin to operate properly again.

• During cooling operation, do not set the vertical airflow

direction louver in the downward position for an ex-

tended period. Water vapor may condense near the out-

let port and drops of water may drip from the air condi-

tioner.

(2) • The range of swing is relative to the currently set airflow

direction.

• The SWING operation may stop temporarily when the

air conditioner's fan is not operating, or when operating

at very low speeds.

(3)

The swing operation is not available depending on the

model. Please refer to the operating manual for the in-

door unit.

En-3

Press the ECONOMY button to start or stop the energy-

saving air conditioner operation.

* The energy save air conditioner operation is not available

depending on the model.

* Press the START/STOP button to set the air conditioner in the operation mode.

Then, proceed with the following steps.

Press the VERTICAL AIRFLOW DIRECTION button. The temperature display will

change to the vertical airflow direction setting display.

Press the VERTICAL AIRFLOW DIRECTION button to change the vertical louvre posi-

tion. The position number will appear on the display.

Press and hold the VERTICAL AIRFLOW DIRECTION button for 2 seconds or more to

set the swing operation ON or OFF.

The flashing display indicates that

the swing operation is OFF.

* Press the START/STOP button to set the air conditioner in the operation mode.

Then, proceed with the following steps.

Press the HORIZONTAL AIRFLOW DIRECTION button. The temperature display will

change to the horizontal airflow direction setting display.

Press the HORIZONTAL AIRFLOW DIRECTION button to change the horizontal lou-

vre position. The position number will appear on the display.

Press and hold the HORIZONTAL AIRFLOW DIRECTION button for 2 seconds or more

to set the swing operation ON or OFF.

The flashing display indicates that

the swing operation is OFF.

Airflow direction

Range of swing

1 to 4

(All range)

Airflow direction

Range of swing

1 to 5

(All range)

1 2

4 5