Bosch CMG633B.1B 사용 설명서 - 페이지 16

{카테고리_이름} Bosch CMG633B.1B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch CMG633B.1B 48 페이지. Compact oven with microwave function

페이지 인쇄

Time-setting options

The value is applied after a few seconds, or you can

touch the

field twice. The cooking time is shown

in the display under the operating mode and

temperature or level.

Press the

Start/Stop button to start.

The cooking time counts down in the display.

The appliance begins to heat up.

Once the cooking time has elapsed, an audible signal

sounds. The appliance stops heating up. The cooking

time 00 m 00 s is shown in the display.

You can use the

field to set another cooking time, or

use the

Start/Stop button to continue the operation

without a cooking time.

When your dish is ready, use the

switch off the appliance.

Changing and cancelling

To change the cooking time, touch the

cooking time is highlighted white and can be changed

using the rotary selector. Use the

change.

If you want to cancel the cooking time, reset the

cooking time to zero. After the change has been

applied, you can continue the operation without a

cooking time using the

Setting the end time

You can delay the time that the cooking time ends. You

can, for example, put your dish in the cooking

compartment in the morning and set the cooking time

so that it is ready at lunch time.

Notes

Ensure that food is not left in the cooking

compartment for too long as it may spoil.

Do not adjust the end time once the operation has

started. The cooking result would no longer be

satisfactory.

Setting

The end of the cooking time can be delayed by a

maximum of 23 hours and 59 minutes.

Example in the picture: The set cooking time is 45

minutes and you want the dish to be ready at 12.00

p.m.

Set the operating mode and temperature or level.

Set the cooking time.

On/Off button to

field. The

field to accept the

Start/Stop button.

Before starting, touch the

The end time is highlighted in white in the display.

Turn the rotary selector to set a later end time.

The value is applied after a few seconds, or you can

touch the

field again. The end time is shown in

the display under the operating mode and

temperature or level.

Press the

Start/Stop button to start.

The time at which the appliance will start is shown in

the display.

The appliance is in standby mode. When the appliance

starts, the cooking time counts down in the display.

Once the cooking time has elapsed, an audible signal

sounds. The appliance stops heating up. The cooking

time 00 m 00 s is shown in the display.

You can use the

field to set another cooking time, or

use the

Start/Stop button to continue the operation

without a cooking time.

When your dish is ready, use the

switch off the appliance.

Changing and cancelling

To change the end time, interrupt the operation using

the

Start/Stop button and then touch the

twice. The end time is highlighted white and can be

changed using the rotary selector. Continue the

operation using the

Start/Stop button.

If you want to cancel the end time, reset the end time to

zero. You can start the set cooking time immediately

using the Start/Stop button.

The end time can only be changed if the cooking

Note:

time has not elapsed. Otherwise the cooking result

would no longer be satisfactory.

field once again.

On/Off button to

field