Draytek Vigor 3300 Series 빠른 시작 매뉴얼 및 안전 권장 사항
{카테고리_이름} Draytek Vigor 3300 Series에 대한 빠른 시작 매뉴얼 및 안전 권장 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek Vigor 3300 Series 4 페이지. Broadband voip / security / load balancer router
Draytek Vigor 3300 Series에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 적합성 선언 (1 페이지), 문제 해결 매뉴얼 (12 페이지)
페이지 인쇄
Quick Start Guide and Safety Recommendations
Vigor3300 Series
To ensure secure and reliable Internet access over
enterprise networks, Vigor3300 is a comprehensive NAT,
optional security suite combining firewall, VPN, URL content
filtering facilities, as well as bandwidth management, and
VoIP capabilities. The application scenario is shown as
follows.
1. Installation and LED Indications
1.1 At first step, connect the power cord to Vigor3300's
power port, and the plug the power cord into an electrical
outlet. The PWR LED should be ON. After the system test
is complete, the ACT LED will light up and start blinking.
1.2 Connect one end of an Ethernet cable to one of the 4
LAN ports on the front of Vigor3300. Connect the other
end to the Ethernet port on your PC. The LAN LED on the
front panel will light up.
Broadband VoIP/Security/Load Balancer Router
The guide provides three sections of Vigor3300 series basic
indications and configurations.
The content covers the following topics:
• Installation and LED Indications
• Basic Settings
• Safety Recommendations and Warranty
1.3 Connect your broadband modem/router's Ethernet cable
to the WAN1 port of Vigor3300, and then check the
WAN1 LED status. The WAN1 LED will light up.
1.4 Check the LED on VoIP modules. The LED will light up,
which means "In-Service".
(Panel LEDs)
(Panel FXS)
(Panel FXO)