Bosch Divar 700 Series 운영 매뉴얼 - 페이지 20
{카테고리_이름} Bosch Divar 700 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Divar 700 Series 22 페이지. Digital hybrid recorder
digital network recorder
Bosch Divar 700 Series에 대해서도 마찬가지입니다: 정보 (11 페이지), 사양 (8 페이지), 빠른 설치 (4 페이지), 빠른 설치 (4 페이지), 기본 지침 (14 페이지)
페이지 인쇄
Divar 700 Series
Contact inputs
If a contact input causes an alarm
–
–
–
–
Motion events
If a motion detection signal causes an event
–
–
–
Video loss alarm
If the loss of a video signal causes an alarm:
Monitor A or B (hybrid version only) can be configured to show the video loss signal.
–
–
–
Acknowledging a video loss alarm
Press the acknowledge key
If the camera with video loss is visible, the black cameo and the video loss message continue
to be displayed as long as there is no video present.
If an alarm is not acknowledged, the beeper switches off after the dwell time but the alarm
still needs to be acknowledged.
If auto-acknowledge is enabled the beeper, and the video loss
switch off after the dwell time.
Bosch Security Systems
Monitors A and B (hybrid version only) can display an array of pre-selected cameras.
Monitor A: The border around the displayed cameos is red. The alarm icon is displayed in
the corresponding cameo. An alarm status message is displayed.
The alarm beeper sounds. The alarm
Controllable cameras might be moved to pre-defined positions.
Monitors A and B (hybrid version only) can switch to display the motion events.
The motion icon is displayed in the corresponding cameo. An alarm status message is
displayed.
The motion
indicator on the front panel flashes.
One or both monitors can switch to a multiscreen view. The lost camera signal is
displayed as a black cameo with the video loss message. On monitor A, the border
around the camera with the video loss is red. An alarm status message is displayed.
The alarm beeper sounds.
The video loss
and
–
The beeper is silent.
–
The video loss
–
The alarm status message disappears.
–
The last-used view mode is restored.
Operations manual
and the
indicators flash.
to acknowlede a video loss alarm.
and
indicators are no longer lit.
Operating instructions | en
indicators flash.
and
indicators,
F.01U.140.955 | v3.0 | 2009.11
20