Bosch Divar 700 Series 운영 매뉴얼 - 페이지 5
{카테고리_이름} Bosch Divar 700 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Divar 700 Series 22 페이지. Digital hybrid recorder
digital network recorder
Bosch Divar 700 Series에 대해서도 마찬가지입니다: 정보 (11 페이지), 사양 (8 페이지), 빠른 설치 (4 페이지), 빠른 설치 (4 페이지), 기본 지침 (14 페이지)
페이지 인쇄
5
en | Operating instructions
Viewing pictures
The hybrid version has two monitor outputs, A and B. The way in which these monitors display
pictures depends on how the system is configured. When an alarm or motion input is
detected, the camera picture with the Alarm/Motion indicator can be displayed on monitor A,
B, or both. When multiple alarms or motion occur, camera pictures are combined in a
multiscreen window on monitor A, B, or both.
Monitor A
Monitor A is the main monitor. It shows full-screen, quad, or multiscreen live or playback
pictures of both analog and IP cameras. Status messages, alarms, motion, and video loss
warnings are also displayed on this monitor. When the menu system is activated it is
displayed on this monitor.
Monitor B (hybrid version only)
Monitor B displays full-screen, quad, or multiscreen live pictures of analog cameras.
Selecting a monitor to control
To control the display on monitor A:
1.
2.
To control the display on monitor B:
1.
2.
Viewing
The drawing shows all possible views for monitor A and B. Some multiscreen views may have
been disabled during set up. The Divar model and the number of connected cameras also
influence the available multiscreen views.
Figure
The multiscreen modes can have different multiscreens that can be shown in sequence to
display all camera pictures.
F.01U.140.955 | v3.0 | 2009.11
Check that the
light on the front panel is lit.
If
is not lit, press the monitor
Check that the
light on the front panel is lit.
If
is not lit, press the monitor
Single
1
Quad
1
2
3
4
Supports single, quad, 3x3, and 4x4 screen viewing
Operations manual
key.
key
4x4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
3x3
1
2
3
4
5
6
7
8
9
Divar 700 Series
Bosch Security Systems