Bosch HB 39 B Series 사용자 설명서 및 설치 지침 - 페이지 11
{카테고리_이름} Bosch HB 39 B Series에 대한 사용자 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HB 39 B Series 36 페이지.
Bosch HB 39 B Series에 대해서도 마찬가지입니다: 사용자 설명서 및 설치 지침 (40 페이지)
페이지 인쇄
Changing the temperature
You can change the temperature at any time.
8 Rapid heating
To save time, you can use rapid heating to shorten the
preheat time.
Only use rapid heating when a temperature of over
100 °C has been set.
You can use rapid heating for the following types of
heating:
¡ 3D hot air
¡ Top/bottom heating
¡ Intensive heat
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
Use the button to select the different time-setting op-
tions.
Time-setting
Use
option
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time for the op-
eration, operation of the appliance
stops automatically once this time
has elapsed.
End
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 24 hours. The timer
has its own audible signal so that you can tell whether
it is the timer or a cooking time which has elapsed.
Touch the button.
1.
appears in the display.
a
Use the temperature selector to set the timer dura-
2.
tion.
The timer duration can be set in 30-second incre-
ments up to 10 minutes. The time increments then
become bigger as the value increases.
Press the button to confirm.
3.
Use the temperature selector to set the required
▶
temperature.
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
Set a suitable type of heating and a temperature of
1.
at least 100 °C.
Press the
button.
2.
a
appears in the display.
a Rapid heating starts after a few seconds.
a Once rapid heating has ended, an audible signal
sounds and the
symbol goes out in the display.
Place the food in the cooking compartment.
3.
a The timer starts and the timer duration begins to
count down after a few seconds.
a An audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
Once the timer duration has elapsed:
4.
Press any button to switch off the timer.
‒
Changing the timer
You can change the timer duration at any time.
Requirement: is highlighted in the display.
Use the temperature selector to change the timer
▶
duration.
a The appliance applies the change after a few
seconds.
Cancelling the timer
You can cancel the timer duration at any time.
Requirement: is highlighted in the display.
Use the temperature selector to reset the duration of
▶
the timer to zero.
a After a few seconds, the appliance applies the
change and goes out.
9.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and temperature or
setting have been set.
Touch the button.
1.
Use the function selector to select the cooking
2.
time .
Use the temperature selector to set the cooking
3.
time.
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments.
Rapid heating en
11