Bosch HB 74S Series 사용 설명서 - 페이지 14

{카테고리_이름} Bosch HB 74S Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HB 74S Series 28 페이지.

페이지 인쇄

Hook the seal in to the bottom of the panel again (fig. D).

Insert the uppermost panel at an angle to the back into the

brackets. Take care not to push the seal to the back (fig. E).

Troubleshooting

Quite often, when there is a malfunction, it is usually a small

irregularity which is easy to rectify. Before contacting the

Technical Assistance Service, try to determine the cause of the

fault using the following table.

Troubleshooting table

Fault

Possible cause Solution/advice

The oven does

The fuse has

not work.

blown.

Power cut

The

symbol

lights up on the

display with

some zeros.

The oven does

There is dust in

not work.

the contacts.

The oven door

does not open.

has been

locked by the

The

symbol

self-cleaning

lights up on the

function

display panel.

The display

The appliance

has been auto-

shows

"‰

matically turned

off.

Check the condition of the

fuse/circuit breaker in the

fuse box.

Check that the light in the

kitchen and other house-

hold appliances are work-

ing.

Set the time once again.

Turn the control knob sev-

eral times in both direc-

tions.

Wait until the oven has

cooled and the

turns off.

Turn the function control

knob to the zero setting.

Insert the two small seals on the left and right of the panel

again (fig. F).

Put the cover back in place and screw it on.

Attach the oven door.

Do not use the oven again until the panels have been

correctly installed.

Error messages

When the indicator displays an error message with

the

sensor. The message will disappear. The set time

function will be deleted. If the error message does not

disappear, call the Technical Assistance Service.

The following error messages can be solved by the user.

Error message Possible cause Solution/advice

"‹‚‚

"‚‹‡

"‚‚†

Risk of electrical discharge and the resulting shock.!

symbol

Incorrect repairs can be dangerous. Repairs can only be

carried out by qualified personnel from the Technical

Assistance Service.

A sensor has

Press all the sensors one

been pressed

by one. Check if a sensor is

for too long or

stuck, covered or dirty

has got stuck.

The door lock

Press the

has been acti-

can now begin program-

vated with the

ming again.

door open.

The tempera-

The door oven is locked

ture inside the

and heating has stopped.

oven is too

Wait until the oven has

high.

cooled. Press the

and reset the time.

, press

sensor. You

sensor