Bosch HBA13B120B 사용 설명서 지침 - 페이지 11

{카테고리_이름} Bosch HBA13B120B에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HBA13B120B 24 페이지. Hba13b1 series built-in oven

페이지 인쇄

Changing the basic settings

Your oven has various basic settings. These settings can be

customised to suit your requirements.

Basic setting

c1 Clock display

c2 Signal duration upon

completion of a

cooking time or

timer period

c3 Waiting time until a

setting is applied

* Factory setting

No other time-setting option should have been set.

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

Slight differences in the colours on the front of the oven are

■

caused by the use of different materials, such as glass,

plastic and metal.

Shadows on the door panel which look like streaks, are

■

caused by reflections made by the oven light.

Enamel is baked on at very high temperatures. This can

■

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

To ensure that the different surfaces are not damaged by using

the wrong cleaning agent, observe the information in the table.

Do not use

sharp or abrasive cleaning agents,

■

cleaning agents with a high concentration of alcohol,

■

hard scouring pads or sponges,

■

high-pressure cleaners or steam cleaners.

■

Wash new sponge cloths thoroughly before use.

Area

Cleaning agents

Oven front

Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Do not use glass cleaners or

glass scrapers.

Selection 1 Selection 2 Selection 3

always*

only with

the

but-

ton

approx.

10 second

2 minutes*

5 minutes

approx.

2 seconds

5 seconds*

10 second

Press and hold the

button for approx. 4 seconds.

The current basic setting for the clock display is shown in the

display, e.g. c1 1 for selection 1.

Use the

button to change the basic setting.

Confirm by pressing the

The next basic setting appears in the display. You can scroll

through all levels with the

with the

button.

To finish, press and hold the

All basic settings are applied.

You may change the basic settings at any time.

Area

Cleaning agents

Stainless steel

Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Remove flecks of limescale,

grease, starch and albumin (e.g. egg

white) immediately. Corrosion can form

under such residues.

Special stainless steel cleaning prod-

ucts suitable for warm surfaces are avail-

able from our after-sales service or from

specialist retailers. Apply a thin layer of

the cleaning product with a soft cloth.

Door panels

Glass cleaner:

Clean with a soft cloth. Do not use a

glass scraper.

Door cover

Stainless steel cleaning agents (available

from our after-sales service or from spe-

cialist retailers):

Please observe the manufacturer's

instructions.

Cooking compart-

Hot soapy water or a vinegar solution:

ment

Clean with a dish cloth.

If there are heavy deposits of dirt, use a

stainless steel scouring pad or oven

cleaner. Only use when the cooking

compartment is cold.

It is best to use the self-cleaning function.

Observe the instructions in the Self-clean-

ing section when doing so.

Glass cover for the

Hot soapy water:

oven light

Clean with a dish cloth.

Shelves

Hot soapy water:

Soak and clean with a dish cloth or

brush.

Telescopic shelves Hot soapy water:

Clean with a dish cloth or a brush.

Do not soak. Clean in the dishwasher, or

in the oven as part of the self-cleaning

programme. The rails may be damaged

causing them to jam.

button.

button and change the setting

button for approx. 4 seconds.