AirStage UTY-LNHY 운영 매뉴얼 - 페이지 6

{카테고리_이름} AirStage UTY-LNHY에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AirStage UTY-LNHY 10 페이지. Wireless
AirStage UTY-LNHY에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)

To Change Operating Conditions
If you wish to change operating conditions (Mode, Fan Speed, Tempera-
ture Setting), after making the timer setting wait until the entire display
reappears, then press the appropriate buttons to change the operating
condition desired.
About the Program timer
● The program timer allows you to integrate OFF timer and ON
timer operations in a single sequence. The sequence can
involve 1 transition from OFF timer to ON timer, or from ON
timer to OFF timer, within a 24 hour period.
● The fi rst timer function to operate will be the 1 set nearest to the
current time. The order of operation is indicated by the arrow
in the Remote Control Unit's Display (OFF → ON, or OFF ←
ON).
● One example of Program timer use might be to have the air
conditioner automatically stop (OFF timer) after you go to
sleep, then start (ON timer) automatically in the morning before
you arise.

SLEEP TIMER OPERATION

Unlike other timer functions, the SLEEP timer is used to set the
length of time until air conditioner operate is stopped.
To Use the SLEEP Timer
While the air conditioner is operating or
stopped, press the "SLEEP" button.
The receiver unit control panel's OPERATION Indicator Lamp
(green) lights and the TIMER Indicator Lamp (orange) light.
To Change the Timer Settings
Press the "SLEEP" button once again and
set the time using the "TIMER
" button.
button: Press to advance the time.
button: Press to reverse the time.
About 5 seconds later, the entire display will reappear.
To Cancel the Timer
Use the "TIMER MODE" button to select "CANCEL".
The air conditioner will return to normal operation.
To Stop the Air Conditioner During Timer Operation:
Press the "START/STOP" button.
About the SLEEP Timer
To prevent excessive warming or cooling during sleep, the SLEEP
timer function automatically modifi es the temperature setting
in accordance with the set time setting. When the set time has
elapsed, the air conditioner completely stops.
Based on temperature set in remote control unit, temperature of
indoor unit varies little by little. However in this case, temperature
indication of remote control unit does not vary as it continues to
indicate the temperature when SLEEP Timer was set.
En-5
AMP Air Conditioning
During Heating operation (Indoor unit):
When the SLEEP timer is set,
the temperature setting is auto-
matically lowered 1 °C every 30
minutes. When the preset tem-
perature has been lowered a total
of 4 °C, the temperature setting at
that time is maintained until the set
time has elapsed, at which time
the air conditioner automatically
turns off.
During Cooling/Dry operation (Indoor unit):
When the SLEEP timer is set,
the temperature setting is au-
tomatically raised 1 °C every 1
hour. When the preset tempera-
ture has been raised a total of
2 °C, the temperature setting at
that time is maintained until the
set time has elapsed, at which time the air conditioner automati-
cally turns off.

MANUAL AUTO OPERATION

Use the MANUAL AUTO operation in the event the remote control
unit is lost or otherwise unavailable.
How To Use the Main Unit Controls
Press the "MANUAL AUTO" button on the
receiver unit control panel.
To stop operation, press the "MANUAL AUTO" button once again.
● When the air conditioner is operated with the controls on the receiver
unit, it will operate under the same mode as the AUTO mode selected
on the remote control unit.
/ TIMER
However, about Multi-type Air conditioner, the Heat pump model will
follow the operating mode of the other indoor unit.
● The fan speed selected will be "AUTO" and the temperature setting
will be 24 °C.

ECONOMY OPERATION

Begin Air Conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the "ECONOMY" button.
"ECO" appears on the Remote Control Unit display.
Economy operation begins.
To Stop the ECONOMY Operation
Press the "ECONOMY" button again.
"ECO" disappears from the Remote Control Unit display.
Normal operation begins.
About the ECONOMY Operation
Economy operation can be set by remote controller.
The temperature setting is offset automatically over a certain
period of time.
Based on temperature set in remote control unit, temperature of
indoor unit varies little by little. However in this case, temperature
indication of remote control unit does not vary as it continues to
indicate the temperature when ECONOMY Operation was set.
www.ampair.co.uk | sales@ampair.co.uk
SLEEP timer setting
1 °C
2 °C
3 °C
4 °C
30
minutes
1 hour
1 hour
30 minutes
Set time
SLEEP timer setting
Set time
1 hour
2 °C
1 °C