Electrolux 400 SERIES 사용 및 관리 매뉴얼 - 페이지 9

{카테고리_이름} Electrolux 400 SERIES에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 400 SERIES 28 페이지. Front load dryer
Electrolux 400 SERIES에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (16 페이지), 사용 및 관리 매뉴얼 (39 페이지), 설치 지침 매뉴얼 (50 페이지), 사용 및 관리 매뉴얼 (46 페이지)

Electrolux 400 SERIES 사용 및 관리 매뉴얼
Operating Your Dryer
WARNING
To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in this Use & Care Guide before operating your dryer.
WARNING
DO NOT operate dryer without lint filter
in place.
STEPS
1. Prepare
• Dry items of similar fabric, weight and con-
load for
struction in the same load.
drying.
• Separate dark items from light-colored
items. Separate items that shed lint from
those that attract lint.
• Check for stains which may not have been
removed in washing. Repeat stain removal
process and wash again before drying. Dryer
heat may permanently set some stains.
• Place delicate, rubber coated, or small items
in a mesh bag (not included).
• Be sure buckles, buttons and trim are heat-
proof and won't damage the drum finish.
Close zippers; fasten hooks and loop fasten-
ers. Tie strings and sashes to prevent snag-
ging and tangling.
2. Check that
the lint filter
is clean
and in
place.
3. Load the
• Load items loosely. The average wet load
dryer and
will fill the drum 1/3 to 1/2 full. Items need
close the
room to tumble freely for even drying and
door.
less wrinkling.
• If desired, place a dryer fabric softener sheet
on top of the load at the beginning of the
cycle.
• When drying large items, dry only two or
three items at a time. Fill out the load with
smaller items.
• For delicate or very small loads, add two or
three similar items to improve tumbling ac-
tion.

Operating Instructions

Clean the lint filter after every load.
TIPS
WARNING
IMPORTANT
DO NOT machine
wash items contain-
ing fiberglass. Small
particles of fiberglass
left in drum may
transfer to fabrics
in other loads and
cause skin irritation
and/or damage to
fabrics.
DO NOT wash water
resistant and water
repellent type cloth-
ing or other materials.
DO NOT operate
dryer without lint filter
in place.
DO NOT overload
the dryer. To save en-
ergy, time and avoid
uneven drying and
wrinkling avoid over-
loading the dryer.
DO NOT over-dry.
Over-drying can
cause wrinkles,
shrinkage, lint, and
a build up of static
electricity.
9