Electrolux 400 SERIES 사용 및 관리 매뉴얼 - 페이지 24

{카테고리_이름} Electrolux 400 SERIES에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 400 SERIES 46 페이지. Front load dryer
Electrolux 400 SERIES에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (16 페이지), 사용 및 관리 매뉴얼 (39 페이지), 설치 지침 매뉴얼 (50 페이지), 사용 및 관리 매뉴얼 (28 페이지)

Electrolux 400 SERIES 사용 및 관리 매뉴얼
Installation
24

Reversing the door

Door reversibility is available on all dryer models.
BEFORE YOU REVERSE YOUR DRYER
DOOR:
1. Be sure you have adequate swing area
before reversing door.
2. Gather your tools - including a screw
driver with a #2 square bit and plastic
knife (or small, flat prying tool that won't
damage paint).
3. Be sure dryer is unplugged from power
source!
Failure to disconnect power source before servicing could result in personal injury or
even death.
Removing latch and hole plugs
1. Open the door.
2. Remove plastic hole plugs and save to
reinstall later. You may have to use a
non-scratching plastic knife if you are
unable to dislodge the plugs manually.
NOTE
IMPORTANT
WARNING
ELECTRICAL SHOCK HAZARD
x2
Tools needed for reversal:
3. Remove both screws from door latch.
Save latch and screws for reinstallation
later.
x2
Screwdriver
with #2
square bit
Plastic knife