Electrolux 500 SERIES 사용 및 관리 매뉴얼 - 페이지 25

{카테고리_이름} Electrolux 500 SERIES에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 500 SERIES 46 페이지. Front load dryer
Electrolux 500 SERIES에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (39 페이지), 설치 지침 매뉴얼 (50 페이지), 사용 및 관리 매뉴얼 (28 페이지)

페이지 인쇄

Removing door assembly

1. Completely open the door to expose all

four hinge screws.

2. Remove all four hinge screws with #2

square bit driver. Save for reinstalling

later.

3. Grasp the door with both hands and lift

slightly as you pull door and hinge away

from the front panel.

Reinstalling door assembly

1. Rotate the door and hang the upper

hook on the back of the hinge in the

upper hole of the front panel.

2. Reinstall and tighten all four screws

removed earlier - two front screws first,

then two side screws.

Reinstalling latch and hole plugs

1. Install door latch with screws removed

earlier.

2. Insert plastic hole plugs removed earlier.

Verify reversed door operation

1. Test door for free, smooth swinging

operation and secure latching when

closed.

2. Plug in dryer and close the door. Start

a test cycle: drum should tumble until

door is pulled open or cycle is paused

or canceled.

Installation