Bosch HBA36B6 0 Series 사용 설명서 - 페이지 11
{카테고리_이름} Bosch HBA36B6 0 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HBA36B6 0 Series 36 페이지.
페이지 인쇄
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time, regardless of whether oven
is switched on or off.
Press the
button.
0
1.
The time-setting options menu appears. The [
brackets shows that the timer function is selected.
Set the running time for the timer using the rotary selector.
2.
Press the
button to close the menu.
0
3.
The time counts down in the clock display.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
:
. Press the
button. The display goes out.
‹‹
‹‹
0
Cancelling the timer time
Press the
button to open the time-setting options menu.
0
Using the rotary selector, turn the time back to
the
button to close the menu.
0
Changing the timer time
Press the
button to open the time-setting options menu. Use
0
the rotary selector to change the time within the next few
seconds. Press the
button to close the menu.
0
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for
180 °C, cooking time of 45 minutes
Press the
button.
0
1.
The time-setting options menu appears. The time-setting
options are displayed in the left-hand side of the display.
The [
] timer function is selected.
U
Using the
button, move to the [
X
2.
Turn the rotary selector to set the cooking time.
3.
Press the
button.
0
4.
The time-setting options menu closes.
If the operation has not yet started, press the
5.
The time starts counting down.
U
] symbol in
:
. Press
‹‹
‹‹
top/bottom heating,
%
] end time.
r
button.
n
The cooking time has elapsed
A signal sounds. The oven stops heating. The cooking time is
at
:
. You can cancel the signal earlier by pressing the
‹‹
‹‹
button.
Cancelling the cooking time
Press the
button to open the menu. Using the
0
switch to the [
] cooking time and use the rotary selector to
r
set the cooking time to
‹‹
the menu.
Changing the cooking time
Press the
0
button to open the menu. Using the
move to the [
r
] cooking time and set the cooking time using
the rotary selector. Press the
Setting a later end time
A later end time can be set for
all types of heating
■
a variety of programmes
■
and the cleaning system
■
Example: you put the dish in the cooking compartment at 9.30.
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. Cooking starts at
12.00 and finishes at 12.45.
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Setting a later end time
Prerequisite: a cooking time has already been set. Operation
has not yet begun. The time-setting options menu
opened.
Using the
button, move to the [
X
1.
Using the rotary selector, set a later end time.
2.
Press the
0
button to close the time-setting options menu.
3.
Confirm by pressing the
4.
The oven is in [
] standby. The end time is shown in the clock
p
display. As soon as operation starts, you will see the cooking
time counting down.
The cooking time has elapsed
A signal sounds. The oven stops heating.
the clock display. You can stop the audible signal by pressing
the
0
button.
Correcting the end time
This is only possible as long as the oven is in [
Press the
button to open the menu. Move to the end time
0
using the
button. Adjust the end time using the rotary
X
selector. Press the
button to close the menu.
0
X
:
‹‹
. Press the
0
button to close
X
button to close the menu.
0
0
] end time .
p
button.
n
:
is shown on
‹‹
‹‹
] standby.
p
0
button,
button,
is
11