Electrolux 600 SERIES 사용 및 관리 매뉴얼 - 페이지 31

{카테고리_이름} Electrolux 600 SERIES에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 600 SERIES 46 페이지. Front load dryer
Electrolux 600 SERIES에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (39 페이지), 설치 지침 매뉴얼 (50 페이지), 사용 및 관리 매뉴얼 (28 페이지)

페이지 인쇄

Cycle selection

Selecting the right cycle to save energy

This dryer has been specifically designed with options to help you save energy and at

the same time utilize the optimal drying setting for your clothing.

The normal cycle was used to rate the dryer for energy efficiency. The

normal cycle defaults to normal temperature setting, normal dryness level

and eco mode option (if available).

Some cycles save more energy than others. Cycles that use the least amount of heat

save the most energy. Use the lowest heat setting (auto and timed dry cycles) and less

dry setting (auto dry cycles) to save on energy and prevent over drying your clothing.

Press the power button to turn on the

unit. Turn the cycle selector in either direc-

tion or repeatedly press the cycles button

(depending on your model) to scroll to the

desired cycle. The indicator light for the

cycle selected will be illuminated and the

estimated drying time for Auto Dry cycles or

the actual drying time for Time Dry cycles

will be displayed on the LED display screen.

Default settings and options will automati-

cally be indicated for the cycle selected. In

most cases cycle settings and options can

be changed. See Cycle Settings, Cycle Op-

tions, and Setting Charts for more details.

To change the cycle once it has begun,

press the cancel button before select-

ing a new cycle. Just turning the cycle

selector ring or pressing the cycles

button WILL NOT change the cycle.

Auto dry cycles

Auto dry cycles take the guesswork out of

selecting the correct drying time for each

load. Moisture sensors sense the moisture

level of the load as it tumbles through the

heated air. With auto dry cycles, the load

will automatically be dried at the selected

temperature to the desired dryness level.

Auto dry cycles save time and energy and

protect fabrics. When the load has reached

the selected dryness level, it will continue to

tumble, unheated, during a cool down pe-

riod. This helps reduce wrinkling and makes

items easier to handle during unloading.

NOTE

Initial cycle times for auto dry cycles are

only estimates, the actual drying time

may differ slightly from the time displayed.

Drying times vary depending on size and

dampness of the load and fabric type. If

the load is too small or almost dry, the

moisture sensors may not detect enough

moisture to continue the cycle and the

cycle may end after a few minutes. If this

Controls and Settings

occurs, then select the time dry cycle to

dry such loads.

Room temperature and humidity, type of

installation and electrical voltage or gas

pressure can also affect drying time.

heavy duty (on select models)

Select this cycle to dry durable fabrics

such as jeans and overalls.

towels (on select models)

Select this cycle to dry heavy loads such as

towels and non-rubber-backed bath mats.

heavy/towels (on select models)

Select this cycle to dry heavy loads and

durable fabrics such as towels, jeans and

overalls.

allergen (on select models)

Select this cycle where you wish to reduce

allergens as you dry your load. Items prone

to heat damage are not recommended for

this cycle.

normal

Select this cycle to dry everyday fabrics

including cottons, linens and sheets.

activewear (on select models)

Select this cycle to dry lightweight synthetic

athletic apparel including stretch fabrics.

delicates

Select this cycle to dry knits and delicates.

mixed load (on select models)

Select this cycle to dry loads containing a

mix of fabrics.

NOTE

Models equipped with the Predictive Dry

feature use the first 90 seconds of Auto

Dry cycles to sense the load in the dryer.

During this 90 second period

the LED display will show 3 dots

(

) cycling one to the next. When

the sensing is complete, the LED display

will show the remaining cycle time in min-

utes and will accurately count down to the

end of the cycle.