Bosch HBA43B251 사용 설명서 - 페이지 12

{카테고리_이름} Bosch HBA43B251에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HBA43B251 28 페이지.

페이지 인쇄

Changing the basic settings

Your oven has various basic settings. These settings can be

customised to suit your requirements.

Basic setting

Selection 1 Selection 2 Selection 3

c1 Clock display

always*

c2 Signal duration

approx.

upon completion of

10 seconds

a cooking time or

timer period

c3 Waiting time until a

approx.

setting is applied

2 seconds

* Factory setting

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

Slight differences in the colours on the front of the oven are

■

caused by the use of different materials, such as glass,

plastic and metal.

Shadows on the door panel which look like streaks, are

■

caused by reflections made by the oven light.

Enamel is baked on at very high temperatures. This can

■

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

To ensure that the different surfaces are not damaged by using

the wrong type of cleaning agent, observe the information in the

table. Do not use

harsh or abrasive cleaning agents,

■

cleaning agents with a high concentration of alcohol,

■

hard scouring pads or sponges,

■

high-pressure cleaners or steam cleaners.

■

Wash new sponge cloths thoroughly before use.

Area

Cleaning agents

Oven front

Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth. Do not use glass cleaners or glass

scrapers.

Stainless steel

Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth. Remove traces of limescale, grease,

starch and albumin (e.g. egg white) immedi-

ately. Corrosion can form under such resi-

dues.

Special stainless steel cleaning products

suitable for hot surfaces are available from

our after-sales service or from specialist

retailers. Apply a very thin layer of the

cleaning product with a soft cloth.

only with

the

but-

ton

approx.

2 minutes*

5 minutes

approx.

5 seconds*

10 seconds

No other time-setting option should have been set.

Press and hold the

button for approx. 4 seconds.

The current basic setting for the clock display is shown in the

display, e.g. c1 1 for selection 1.

Use the

button to change the basic setting.

Confirm by pressing the

The next basic setting appears in the display. You can scroll

through all levels with the

with the

button.

To finish, press and hold the

All basic settings are applied.

You may change the basic settings at any time.

Area

Cleaning agents

Door panels

Glass cleaner:

Clean with a soft cloth. Do not use a glass

scraper.

Glass cover for

Hot soapy water:

the oven light

Clean with a dish cloth.

Seal

Hot soapy water:

Do not remove.

Clean with a dish cloth. Do not scour.

Rails

Hot soapy water:

Soak and clean with a dish cloth or brush.

Telescopic

Hot soapy water:

shelves

Clean with a dish cloth or a brush.

Do not remove the lubricant while the pull-

out rails are pulled out – it is best to clean

them when they are inserted. Do not soak

or clean in the dishwasher.

Accessories

Hot soapy water:

Soak and clean with a dish cloth or brush.

Cleaning the self-cleaning surfaces in the cooking

compartment

The back wall, ceiling and side walls of the cooking

compartment are coated with a highly porous ceramic layer.

This coating absorbs and disintegrates splashes from baking

and roasting while the oven is in operation. The higher the

temperature and the longer the oven is in operation, the better

the result will be.

If splashes are still visible even after repeated use, proceed as

follows:

Clean the cooking compartment floor and side panels

thoroughly.

Set

3D hot air.

With the door closed, heat up the empty oven for

approximately 2 hours at maximum temperature.

The ceramic coating is regenerated. When the cooking

compartment has cooled down, remove the brown or white

residue with water and a soft sponge.

Light discolouration of the coating does not affect automatic

self-cleaning.

button.

button and change the setting

button for approx. 4 seconds.