Electrolux 7000 사용자 설명서 - 페이지 30
{카테고리_이름} Electrolux 7000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 7000 36 페이지. Cooking stove
Electrolux 7000에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지)
페이지 인쇄
PART - 6.
BEFORE CALLING YOUR AFTER SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels
or if a problem occurs with the appliance. Warning codes are displayed in the freezer and
cooler indicators.
ERROR TYPE
E01
E02
E03
E06
E07
E08
E09
MEANING
Sensor warning
Low Voltage
Warning
Freezer
compartment is not
cold enough
WHY
-
Power supply to the
device has dropped to
below 170 V.
Likely to occur after
long term power failure.
Hot food has been left
in the fridge.
First time the appliance
has been switched on.
EN -30-
WHAT TO DO
Call Service for assistance as
soon as possible.
- This is not a device
failure, this error helps to
prevent damages to the
compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs
to be contacted.
1. Set the freezer
temperature to a colder
value or set Super Freeze.
This should remove
the error code once the
required temperature has
been reached. Keep doors
closed to improve time
taken to reach the correct
temperature.
2. Remove any products
which have thawed/
defrosted during this error.
They can be used within a
short period of time.
3. Do not add any fresh
produce to the freezer
compartment until the
correct temperature has
been reached and the error
is no longer.
If this warning continues an
authorised technician needs
to be contacted.