Alemlube HR90050 소유자 기술 매뉴얼 - 페이지 6

{카테고리_이름} Alemlube HR90050에 대한 소유자 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alemlube HR90050 10 페이지. Spring rewind hose reel

Parts and Drawing Instructions for HR90000 Series

Industrial Hose Reel 286X Series Instruction

3. Insert end of the hose through guide roller bracket, and feed through the opening in the drum

flange.

4. Use Teflon tape or pipe sealant on hose fitting threads, screw fitting into swivel and tighten.

Note: To avoid damage to the swivel, use a wrench to support the swivel fitting while

tightening the hose.

5. Attach hose stopper on the other end of hose, near the outlet fitting.

6. Carefully release drum latch, and slowly allow hose to wind onto the reel.

Note: Final spring tension adjustment is accomplished by adding wraps of hose around the

drum (to increase tension) or taking off wraps of hose (to decrease tension). Refer to:

Adjustment of Spring Tension.

HR90015 / HR90030 / HR90045 / HR90065 / HR90075

& HR90010 / HR90025 / HR90040 / HR90050 / HR90055 / HR90060 / HR90070

Wall & Floor & Ceiling

Wall

NSW

QLD / PNG

TEL: (02) 9677 1555

TEL: (07) 3204 9166

FAX: (02) 9675 1155

FAX: (07) 3204 1224

Visit our website at

HR90005 / HR90020 / HR90035 Wall & Floor

Wall

5 OF 9

VIC / TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

www.alemlube.com.au

Floor

SA / NT

TEL: (08) 9302 4199

TEL: (08) 8241 7111

FAX: (08) 9303 2095

FAX: (08) 8241 7011

www.alemlube.co.nz

Ceiling

TEL: (64) 9 447 1007

FAX: (64) 9 447 1008