Bosch HBC34D.54. 사용 설명서 - 페이지 11

{카테고리_이름} Bosch HBC34D.54.에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HBC34D.54. 32 페이지. Combination steam oven
Bosch HBC34D.54.에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지), 사용 설명서 (32 페이지)

Bosch HBC34D.54. 사용 설명서

Setting a later end time

You can delay the time at which you wish your dish to be ready.
The appliance starts automatically and is ready at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
For some programmes it is not possible to change the end
time.
In the
è
Steam operating mode, the cooking time does not
start counting down until the heating-up time has finished. The
selected end time is delayed by the length of the heating-up
time.
Example in the picture:
it is 10:30, the dish will take 45 minutes to cook but should be
ready at 12:30.
Prerequisites:
An operating mode and temperature have been set.
Press
repeatedly until the brackets are around the
0
1.
Cooking time.
Use the
or
button to set the cooking time.
@
A
2.
Press the
0
button.
3.
The brackets are around
dish will be ready is displayed.
Use the
button to delay the end time.
@
4.

Automatic programmes

You can prepare food really easily with 40 different
programmes.
In this section, you will find out
how to set one of the automatic programmes
hints and tips on the programmes
which programmes you can set

Setting a programme

Select the appropriate programme from the programme table.
Follow the instructions for the programmes.
Turn the operating mode selector to
1.
The first programme
˜ ‚
(End time). The time when the
(End time). The time when the
(End time). The time when the
p
.
`
appears in the display.
Press the
n
5.
The appliance switches to standby. The [
shown in the display. Cooking starts at the right time. The
cooking time starts counting down in the display.
Changing the end time
Use the
or
@
A
been set, first press the
time appears.
After a few seconds, the change is adopted. Do not change the
end time if the cooking time has already started to elapse. The
cooking result would no longer be correct.
The cooking time has elapsed
An audible signal sounds. The appliance stops heating. Press
the
button to stop the audible signal. To switch off the
0
appliance, turn the operating mode and temperature selectors
back to the
position. Open the appliance door carefully. Hot
Û
steam will escape.
Cancelling the end time
Use the
button to set the end time back to the current time. If
A
the timer has been set, first press the
the [
] cooking time appears.
r
r
After a few seconds, the change is adopted. The selected
cooking time starts counting down straight away.
cooking time starts counting down straight away.
cooking time starts counting down straight away.

Setting the clock

Example: changing from summer to winter time.
Example: changing from summer to winter time.
Example: changing from summer to winter time.
No other time-setting function should be set.
No other time-setting function should be set.
No other time-setting function should be set.
Press the
0
0
0
1.
Use the
or
or
or
@
@
@
A
A
A
2.
After a few seconds, the time which has been set is adopted.
After a few seconds, the time which has been set is adopted.
After a few seconds, the time which has been set is adopted.
After a power cut
After a power cut
After a power cut
After a power cut, the
After a power cut, the
After a power cut, the
display. Press the
display. Press the
display. Press the
clock. After a few seconds, the time which has been set is
clock. After a few seconds, the time which has been set is
clock. After a few seconds, the time which has been set is
adopted.
adopted.
adopted.
Hiding the clock
Hiding the clock
Hiding the clock
You can hide the clock. It is then only visible when the
appliance is in operation (see section: Basic settings).
Use the
or
@
2.
button.
button to change the end time. If the timer has
button repeatedly until the [
0
button repeatedly until
0
repeatedly until the [
repeatedly until the [
repeatedly until the [
0
] Clock symbol appears.
button to set the clock.
button to set the clock.
button to set the clock.
and
:
symbols light up in the
0
‹‹
‹‹
0
button. Use the
@
or
button to set the programme.
A
] end time is
p
] end
p
A
button to set the
11