Bdcom S2510-B 하드웨어 설치 매뉴얼 - 페이지 13

{카테고리_이름} Bdcom S2510-B에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bdcom S2510-B 19 페이지.

3.3.2

Connecting the SFP Ports

S2510-B provides 2 gigabit SFP ports. The two ports correspond to one indicator

respectively. To use the optical port, you need connect it to the SFP optical module, and

then to other Ethernet terminal devices through an optical fiber.

3.3.3

S2510-B has 8 10/100/1000Base-T ports. You can connect other Ethernet terminal

devices to the UTP port through the cut-through or cross network cable. The numbering

order of the pins in the UTP port is the same as the console port.

Figure 3- 5 Cable connection at the console port

S2510-B Hardware Installation Manual

- 11 -