Bdcom S2956 series 하드웨어 설치 매뉴얼 - 페이지 12
{카테고리_이름} Bdcom S2956 series에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bdcom S2956 series 19 페이지.
페이지 인쇄
set to a rate of 9600bps, eight data bits, one stop bit, no sum check bit and traffic
control.
Figure 3-3 Connecting the console port of S2956 and computer
Note: The switch shown in the previous figure does not represent real S2956 switch.
Table 3-1 Definition of the pins of the console port
No.
1
Data receiving
2
3
Signal ground
4
5
Data transmitting
Note:
Because the console port of S2956 bears no flow control, you need to set Data flow
control to none when using a superior terminal to manage S2956 configurations, or the
single-pass problem will arise from the superior terminal.
Otherwise, the single-pass problem will arise on the super terminal. The cable is used
to connect the console port of the S2956 switch and the outside console terminal
device. One end of the cable is a mini-USB plug and the other end is a 9-hole plug
(DB9). The RJ45 plug is put into the socket of the console port on the S2956 switch.
The inner line connection in the cable is shown in figure 3-4. The console cable is
numbered as RLC0301.
Name
Symbol
RXD
SG
TXD
S2956 Hardware Installation Manual
Remarks
Input
No connect
GND
No connect
Output
- 10 -