Bdcom S2956 series 하드웨어 설치 매뉴얼 - 페이지 15
{카테고리_이름} Bdcom S2956 series에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bdcom S2956 series 19 페이지.
페이지 인쇄
The direct-through or cross network cable has the function of auto-identification, so the
five classes of direct-through/cross network cables can be used to connect other
Ethernet devices.
3.4
Checkup After Installation
Before electrically starting up the switch, perform the following checkups after the
switch is installed:
If the switch is installed on the cabinet, check whether the installation point
between the cabinet and the switch is strong. If the switch is installed on the desk,
check whether there is enough space for the switch to discharge its heat and
whether the desk is stable.
Check whether the connected power meets the power requirements of the
switch.
Check whether the grounding line is correctly connected.
Check whether the switch is correctly connected to other terminal devices.
the paraphase of data 1
7
Receiving and transmitting
the normal phase of data 3
8
Receiving and transmitting
the paraphase of data 3
S2956 Hardware Installation Manual
TP3+
TP3-
- 13 -