Electrolux ELAY12DGAW8 사용 설명서 - 페이지 10
{카테고리_이름} Electrolux ELAY12DGAW8에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ELAY12DGAW8 31 페이지.
페이지 인쇄10
www.electrolux.com
Cold
water tap
Precautions when connecting
the water supply hoses
If there is only one water tap in the place
where you want to install your washing
machine, make sure that this is a cold
water supply and connect it to the intake
marked COLD, otherwise your washing
machine will indicate that there is a fault
and will not work, since your washing
machine only uses cold water for rinsing.
NOTE 1: "With regard to equipment
connected to the water supply using
removable hoses, the new hoses supplied
with the equipment must be used.
Used hoses must not be used".
Cold
water
inlet
Only one plug
must be used for
the connection.
Hot
water
inlet
NOTE 2: Your washing machine has a red
stopper indicating the hot water intake.
This stopper must be removed when you
connect the hot water hose and if this
option is not being used then the stopper
should be left in place.
Preparations
Electrical connection
The washing machine must be earthed, so
make sure that the plug has three prongs
because otherwise you might experience
an electric shock if there is no insulation.
For the same reason DO NOT USE
extension leads with 2 conductors.
multiple connections
with your washing
machine.
Hot water tap