Draytek VigorSwitch G2280x 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Draytek VigorSwitch G2280x에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorSwitch G2280x 12 페이지. L2+ managed switch
Draytek VigorSwitch G2280x에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지), 빠른 시작 매뉴얼 (9 페이지)
페이지 인쇄
P
a
P
a
Port 1 to 24 (PoE)
Port 1 to 24 (GbE RJ45)
Status
LED
On (Red)
Monitor
Off
Blinking
(Green)
Alert
(for P2280x)
Off
On (Green)
Blinking
SYS
(Green)
Off
On (Green)
PWR
Off
On (Green) The port is supplied with PoE power.
Port 1 ~ 24
(PoE, for P2280x)
Off
On (Green) The device is connected with 1000Mbps.
On
(Amber)
Port 1 ~ 24
(GbE RJ45)
Blinking
Off
On (Green) The device is connected with 1000Mbps.
Port 25 ~ 28
n
e
l
E
x
p
n
e
l
E
x
p
Explanation
An alert for system failure due to overheating
or wrong voltage.
The device is in normal condition and running
normally.
The power is over (>) 80% watts PoE power
budget.
The power is under (<) 80% watts PoE power
budget.
The switch finishes system booting and the
system is ready.
The switch is powered on and starts system
booting.
The power is off or the system is not ready /
malfunctioning.
The device is powered on and running
normally.
The device is not ready or is failed.
No PoE power is supplied on the port.
The device is connected with 10/100Mbps.
The system is sending or receiving data
through the port.
The port is disconnected or the link is failed.
2
l
a
n
a
t
i
o
l
a
n
a
t
i
o
Port 25 to 28
(SFP+)
n
n