Draytek VigorSwitch G2540 Series 빠른 시작 매뉴얼 - 페이지 10
{카테고리_이름} Draytek VigorSwitch G2540 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorSwitch G2540 Series 15 페이지. L2+ managed switch
페이지 인쇄
P
P
No.
LED
Monitor
Alert
(for P2540x)
SYS
PWR
Port 1 ~ 48
(PoE, for
P2540x)
Port 1 ~ 48
(GbE RJ45)
Port 49 ~ 54
(SFP+)
a
n
e
l
E
x
a
n
e
l
E
x
Status
On (Red)
Off
Blinking (Green)
Off
On (Green)
Blinking (Green)
Off
On (Green)
Off
On (Green)
Off
On (Green)
On (Amber)
Blinking
Off
On (Green)
On (Blue)
On (Amber)
Blinking
p
l
a
n
a
t
p
l
a
n
a
t
Explanation
An alert for system failure due to overheating
or wrong voltage.
The device is in normal condition and running
normally.
The power is over (>) 80% watts PoE power
budget.
The power is under (<) 80% watts PoE power
budget.
The switch finishes system booting and the
system is ready.
The switch is powered on and starts system
booting.
The power is off or the system is not ready /
malfunctioning.
The device is powered on and running normally.
The device is not ready or is failed.
The port is supplied with PoE power.
No PoE power is supplied on the port.
The device is connected with 1000Mbps.
The device is connected with 10/100Mbps.
The system is sending or receiving data through
the port.
The port is disconnected or the link is failed.
The device is connected with 1000Mbps.
The device is connected with 10Gbps.
The device is connected with 10/100Mbps.
The system is sending or receiving data through
the port.
3
i
o
n
i
o
n