Draytek VigorSwitch P1085 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Draytek VigorSwitch P1085에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorSwitch P1085 15 페이지. Web smart
페이지 인쇄
P
a
P
a
PoE for Port 1 to Port 8
LED
PoE/Alert
(for P1085)
SYS
PWR
PoE 1~8
(for P1085)
Interface
RST
n
e
l
E
x
n
e
l
E
x
RJ45 LNK/ACT
Port 1 to Port 8
Status
Explanation
On
Devices connected over the PoE maximum
power budget.
Blinking
More than 80% of maximum power budget is
supplied for PoE device(s).
Off
Devices connected within the PoE maximum
power budget.
The switch finishes system booting and the
On
system is ready.
The switch is powered on and starts system
Blinking
booting.
The power is off or the system is not ready /
Off
malfunctioning.
On
The device is powered on.
Off
The device is powered off.
On
The port is supplied with PoE power.
Off
No PoE power is supplied on the port.
Description
Factory reset button.
p
l
a
n
a
t
p
l
a
n
a
t
Press it to reboot the system. (<5 seconds)
The PoE/Alert and SYS LEDs will blink too.
Press it to reset the system with factory
default settings. (5~20 seconds)
The PoE/Alert and SYS LEDs will be off if
2
i
o
n
i
o
n