Draytek VigorSwitch V1281 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Draytek VigorSwitch V1281에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorSwitch V1281 20 페이지.

Connect an HDMI-to-IP

receiver

unit to all

output

devices (TVs or Projectors) and

connect an Ethernet cable from the receiver unit to the VigorSwitch V1281 (via your

structured cabling or RJ-45 sockets around the building etc.). Receiver units will also

need power (not shown):

HDMI-to-IP

senders

and

receivers

look alike so double check you have them the right

way around.

Senders

connect to your

source

(e.g. DVD player) and

receivers

connect to your

output

(e.g. television).

Connect your VigorSwitch V1281 to your computer network (we suggest using port 1).

You can connect a PC to the VigorSwitch if you want to use that for configuration, or

you can use a wireless laptop if you have WiFi on your LAN.

Note down what is connected to each port on the V1281, especially if you won't be

able to see the switch from where you're going to configure it. We also recommend

that you label all cables and HDMI extenders which will make changes easier later.