Draytek VigorSwitch V1281 빠른 시작 매뉴얼 - 페이지 17

{카테고리_이름} Draytek VigorSwitch V1281에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorSwitch V1281 20 페이지.

We need to set the function of the ports, but rather than having to edit each

individually, the top pulldown 'Ports' box allows you to select multiple ports and

apply the same function to them all at once, so here we select ports 9, 11, 13

and 15, select the 'Source' button and click 'apply'.

Now you can do the same for the outputs 17, 19 and 21. Select those, select

'Output' and click 'apply':

You may notice the 'Allow LAN Access' checkbox for output ports. Do not click

this unless you need to share the output's Ethernet cable with a data device.

Remember that the port numbers used in these images correspond to our

example as shown in the original table. Your port numbers and the function of

each will, of course, be completely different.

Now you can edit the ports

individually to give them

corresponding names.

Click the green spanner icon next

to each of the 7 ports and name

them all. The example on the

right is for Port 9, your Sky+HD

box.