Electrolux EW 1418 1 지침 책자 - 페이지 11
{카테고리_이름} Electrolux EW 1418 1에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EW 1418 1 30 페이지. Electrolux washing machine instruction booklet
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment
of the dispenser drawer and start the
machine.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
If you have selected the "Prewash" option, pour
detergent into the compartment marked
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
"MAX" mark in the drawer). Close the drawer gently.
3. Switch the machine on
To switch the machine on, press the O
mains-on light comes on. The display will show three
flashing dashes or a blinking zero.
If the programme selector dial is on the Reset Off
position, three flashing dashes will be displayed. If the
programme selector dial has been left on a wash
programme position at the end of the previous washing
cycle, a flashing zero appears on the display.
4. Select the required programme
Turn the programme selector dial to the desired
position: the display will show the duration of the
selected programme. The lights corresponding to the
different phases making up the selected programme
light on.
.
.
The display shows the duration of the programme.
11
/O
button: the
N
FF