Electrolux EW 500 F 지침서 - 페이지 14

{카테고리_이름} Electrolux EW 500 F에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EW 500 F 17 페이지.

Installation

Transit security bars

Before starting the machine up, the transport

security bars must be removed as follows:

You are advised to keep all the transport security

bars in case the appliance has to be transported

again.

P0287

P0018

AL009

1. Unscrew and remove the

three rear screws by

means of a key.

2. Lean the appliance back

on the rear and fit one of

the polystyrene angles

between the appliance

and the floor.

Make sure the hoses

are not squashed.

3. Carefully remove the

plastic bags on the right

and the left, pulling them

to the centre of the

appliance

P0001

P0002

4. Unscrew and remove

the four feet. Fit the

grid on the bottom of

the machine and re-fit

the four feet. Tighten

up the lock nuts on all

feet.

5. Place the machine in

an upright position and

remove the three

plastic bolts.

6. Plug the 3 holes with

the plastic plugs which

you can find in the

envelope containing

the instruction booklet.