Bosch HBG38U7 0 Series 사용 설명서 - 페이지 13
{카테고리_이름} Bosch HBG38U7 0 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HBG38U7 0 Series 40 페이지.
페이지 인쇄Press the
button to close the Time-setting options menu.
0
3.
Confirm by pressing the
4.
The setting is adopted. The oven is in
time is displayed in the status bar. Operation starts at the
appropriate time. The cooking time counts down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
button.
0
Correcting the end time
This is possible while the oven is in standby. Press the
button to open the menu. Press the
End time using the rotary selector. Press the
the menu.
Cancelling the end time
This is possible while the oven is in standby. Press the
button to open the menu. Press the
End time using the rotary selector. Press the
the menu.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
Press the
0
button.
1.
The time-setting options menu appears.
Set the running time for the timer using the rotary selector.
2.
Press the
0
button to close the Time-setting options menu.
3.
The display returns to its previous state. The
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
00:00. You can cancel the signal earlier by pressing the
U
button.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving settings in the memory
You cannot save the cleaning system.
Specify the type of heating, temperature and, if required, a
1.
cooking time for the dish you wish to cook. Do not start. If
you want to save a programme: Select the programme and
enter the weight. Do not start.
Press and hold the
f
button until "Memory saved" is
2.
displayed.
The saved setting is shown in the display and can be started at
any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
button.
n
... standby. The end
0
button and correct the
X
button to close
0
button and reset the
X
button to close
0
symbol for the
U
Cancelling the timer time
Press the
button to open the time-setting options menu.
0
Using the rotary selector, turn the time back to 00:00. Press
the
button to close the menu.
0
Changing the timer time
Press the
button to open the time-setting options menu. Use
0
the rotary selector within the next few seconds to change the
time on the timer. Press the
Setting the clock
The oven must be switched off before you can set or change
the clock.
0
Following a power cut
Following a power cut, the "Basic settings" heading appears in
the display.
Set the right time using the rotary selector.
1.
Press the
0
2.
0
The time is applied.
Changing the clock
Example: changing from summer to winter time.
Press the
0
1.
The time-setting options menu appears.
Use the
X
2.
Change the time using the rotary selector.
3.
Press the
0
4.
The Time-setting options menu closes. The time is changed.
Hiding the clock
The current time appears in the display when the oven is
switched off. You can hide the clock. For more information,
refer to the Basic settings section.
0
Starting the memory
You can start cooking at any time using the settings saved for
your dish.
Press the
f
1.
The saved settings are displayed. If "Memory location empty"
appears, no settings have been saved. You cannot start the
memory. Save the required setting first, as described under
Saving in the memory.
Press the
n
2.
The memory setting starts.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
button to close the menu.
0
button.
button.
button to switch to the clock.
button.
button briefly.
button.
13