Electrolux EW 813 F 설치 및 사용 설명서 - 페이지 14

{카테고리_이름} Electrolux EW 813 F에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EW 813 F 19 페이지. Washing machine
Electrolux EW 813 F에 대해서도 마찬가지입니다: 지침 책자 (20 페이지)

페이지 인쇄

Operating sequence

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C,

the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent recommended by

the manufacturer in a graduated cup and pour it into

the main wash compartment

out a prewash, pour detergent into the appropriate

compartment marked

3. Measure out the additives

If required, pour fabric softener into the compartment

marked

without exceeding the «MAX» mark.

4. Select the desired option(s)

5. Select the temperature

Turn the selector dial to the required temperature

setting.

6. Select the programme and start it

Turn the programme selector dial clockwise to the

required wash programme and press the start/stop

button

: the operating pilot light comes on and the

machine starts to operate.

with

. If you wish to carry

P0876

P0917

P0877

P0880

P0033