Electrolux EW 813 F 지침 책자 - 페이지 6

{카테고리_이름} Electrolux EW 813 F에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EW 813 F 20 페이지. Washing machine
Electrolux EW 813 F에 대해서도 마찬가지입니다: 설치 및 사용 설명서 (19 페이지)

페이지 인쇄

Unpacking

All transit bolts and packing must be

removed before using the appliance.

You are advised to keep all transit devices so that they

can be refitted if the machine ever has to be

transported again.

1. Using a spanner, unscrew and remove the rear

right-hand bolt and lay the machine on its back,

taking care not to squash the hoses. This can be

avoided by placing one of the corner packing

pieces between the machine and the floor.

2. Remove the polystyrene blocks from the bottom of

the machine and release the two plastic bags by

removing the adhesive strip.

3. Carefully remove the right-hand bag (1) then the

left-hand bag (2) by pulling them towards the

centre of the machine.

4. Set the machine upright and remove the two

remaining bolts from the back.

5. Pull out the three plastic spacers from the holes

into which the bolts were fitted.

6. Plug the open holes with the plugs which you will

find at the back of the appliance.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar materials

under the machine to compensate for any

unevenness in the floor.

After having levelled the machine, tighten the lock

nuts.

Installation

P0255

P0802

P0256

P0254

P0233

P0020

P0509