Electrolux EW2F672S 사용자 설명서 - 페이지 7

{카테고리_이름} Electrolux EW2F672S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EW2F672S 32 페이지.

5. Remove the polystyrene protection from

the bottom. Put the appliance back into an

upright position.

7. Remove the three transit bolts and pull

out the plastic spacers.

We recommend that you

keep the packaging and the

transit bolts for any transport

of the appliance.

3.2 Positioning and levelling

1. Install the appliance on a flat hard

floor.

Make sure that the appliance

does not touch the wall or

other units.

2. Loosen or tighten the feet to adjust

the level.

WARNING!

Do not put cardboard, wood

or equivalent materials

below the appliance feet to

adjust the level.

6. Remove the power supply cable and the

drain hose from the hose holders.

It is possible to see water flowing from the

drain hose. This is because the washing

machine has been tested at the factory.

8. Put the plastic caps, that you find in the

user manual bag, in the holes.

The appliance must be level and stable.

A correct adjustment of the

appliance level prevents the

vibration, noise and the

movement of the appliance

when in operation.

ENGLISH