Carl Wittkopp GatorSignal Plus 설치 지침 - 페이지 6
{카테고리_이름} Carl Wittkopp GatorSignal Plus에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Carl Wittkopp GatorSignal Plus 8 페이지.
페이지 인쇄7 Mounting
7.1 Case
67,5
65,5
59,7
47,5
84,5
• Take off the cover for mounting/dismounting.
• Fix the case onto the safe door with at least two screws.
• The case can be sealed with the enclosed adhesive seal after finishing the mounting process in order to visibly prove mani-
pulation of the system.
7.2 Break-out for wiring
• Lead the cables through the break-outs from below.
• Create break-outs at the according places.
• Fix the cables with cable ties onto the case (strain-relief).
• If flexible parts of cables are placed onto clamping strip, it is recommended to protect them with wire-end ferrules or tin coat them.
Attention :
• After taking out the pc board the plastic washer hast o be used when re-mounting (to avoid shorts/damage).
6
Installation instruction GatorSignal Plus