Draytek VigorAP 903 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} Draytek VigorAP 903에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorAP 903 16 페이지. 802.11ac access point
Draytek VigorAP 903에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄

Note



Interface

Description

Wireless band will be switched /changed

according to the button pressed and

released. For example,

 2.4G (On) and 5G (On) – in default.

 2.4G (Off) and 5G (On) – pressed and

 2.4G (On) and 5G (Off) – pressed and

 2.4G (Off) and 5G (Off) – pressed and

WPS - When WPS function is enabled by web

user interface, press this button for more

than 2 seconds. The router will wait for any

wireless client connecting to it through

WPS.

Restore the default settings. Usage: Turn on

the router. Press the button and keep for

more than 10 seconds. Then the router will

restart with the factory default

configuration.

LAN B

Connecter for xDSL / Cable modem (Giga

level) or router.

LAN A4, A3,

Connecter for xDSL / Cable modem (Giga

level) / computer or router.

LAN A1 is used for PoE connection (for

A1 (PoE)

indoor use).

PWR: Connecter for a power adapter.

Connecter for a USB device (for

temperature sensor).

Power switch.

For the sake of security, make the accessory kit away from

children.

Remove the protective film from the access point before use

to ensure ventilation.

released the button once.

released the button twice.

released the button three times.