Draytek VigorAP 910C 빠른 시작 매뉴얼 - 페이지 18

{카테고리_이름} Draytek VigorAP 910C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorAP 910C 19 페이지. 802.11ac ceiling-mount access point
Draytek VigorAP 910C에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (18 페이지)

페이지 인쇄
Draytek VigorAP 910C 빠른 시작 매뉴얼
Default Pre-Shared Key (PSK) with 13 ASCII characters is provided and
stated on the label pasted on the bottom of VigorAP.
5. Open Wireless Setting (5GHz)>>Security. As with the 2.4GHz band, above,
you should change the SSID name, security method and default wireless
password. Click OK to save the settings. Now, you have finished the basic
configuration of VigorAP.
Note that for the communication, all wireless devices must support the same
encryption bit length and share the same key. If WEP mode is selected, only
one of four preset keys can be selected at one time.
Under System Maintenance you can change the access point's default
admin password. You should do this immediately in order to prevent users
from accessing the VigorAP's management interface and changing
settings.
Contacting DrayTek