1RT DTK4400 소유자 매뉴얼 - 페이지 5

{카테고리_이름} 1RT DTK4400에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 1RT DTK4400 8 페이지.

페이지 인쇄

INDEX SEARCH

The index signal is recorded on the tape automatically

when the recording is started. If you want to view a

recording at a specific start point, it can easily be done.

1 Press [SEARCH MODE] so that the Index Search

menu appears.

2 Enter your desired number by

pressing [PLAY] or [STOP] within 30

seconds.

3 Press [F.FWD] or [REW] to start

index search. If you want to go in

the forward direction, press [F.FWD].

If you want to go in the reverse

direction, press [REW].

• After index search, the VCR will play the tape

automatically.

It may be unlawful to record playback copyrighted

material without the consent of the copyright owner.

Accidental erasure prevention

To prevent accidental recording on a

recorded cassette, remove its record

safety tab. To record on it later, cover

the hole with cellophane tape.

Before recording, make sure:

• The desired channel is selected by pressing [Number] on

the remote control or the [CHANNEL

connected the VCR to a cable box or satellite box as in

"VCR to TV connections" on page 3, select the VCR to

channel 3 or 4 the same channel as the CH3 or CH4 switch

on the back of the VCR. Then, select the channel you want

to record at the cable box or satellite box. In this case, you

can ONLY record and view the SAME channel.)

• There is a tape with its safety tab into the VCR.

• The desired recording speed is selected in SP(standard

play) or SLP(super long play) mode by pressing [TAPE

SPEED] on the VCR.

Tape Speed

Type of tape

T60

SP mode

1hour

SLPmod

3hour

VIEWING AND RECORDING THE

SAME PROGRAM

1 Begin the recording by pressing [RECORD].

• To temporarily stop recording or resume it, press

[PAUSE/STILL]. After the VCR has been in Pause mode

for 5 minutes, it will stop automatically to protect the tape

and the video head from damage.

2 Press [STOP] when recording is completed.

OTR(One Touch Recording)

This feature allows you to set the recording length simply

by pressing [REC/OTR] on the VCR.

1 Begin OTR by pressing [REC/OTR] on the VCR

repeatedly until the desired recording length appears.

REC

OTR(0:30)

(Normal recording)

OTR(8:00)

INDEX SEARCH

RECORDING FUNCTION

Record safety tab

(

)

]. (If you

Recording/Playback Time

T120

T160

2hours

2-2/3hours

6hour

8hour

OTR(1:00).....

OTR(7:30)

TIME SEARCH

This feature allows you to fast forward or rewind the

tape for a desired length of time.

1 Press [SEARCH MODE] so that the Time Search

menu appears.

2 Enter your desired time to skip

by pressing [PLAY] or [STOP]

within 30 seconds.

3 Press [F.FWD] or [REW] to start

time search. If you want to go in

the forward direction, press

[F.FWD]. If you want to go in the

reverse direction, press [REW].

• After time search, the VCR will play the tape

automatically.

TIMER RECORDING

You may set the VCR to start recording while you are

away. You can set seven programs to record on specific

days, daily or weekly within a 1 year period.

1 Insert a tape with its safety tab into the VCR.

2 Select main menu by pressing [MENU].

3 Select "TIMER PROGRAMMING" by pressing [PLAY]

or [STOP]. Then, press [F.FWD].

• If you have not yet set the clock, "CLOCK SET"

appears. If so, follow the steps [3] and [4] in "CLOCK

SET UP" section. Then, set the timer recording.

4 Set the timer.

Set the program number (1~7)

Program number which is not set up flashes.

Press [PLAY] or [STOP] repeatedly for the

desired program number.Then, press [F.FWD].

Select once, daily or weekly recording

For once: Press [PLAY] or [STOP] to point to "ONCE".

For daily (Monday~Friday): Press [PLAY] or

[STOP] to point to "DAILY".

For weekly: Press [PLAY] or [STOP] to point to

"WEEKLY".

Then, press [F.FWD].

Set the date

First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].

Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].

Set the start time

First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].

Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD].

And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD].

Set the end time

Follow the instructions of "Set the start time" to set the end time.

Set the channel number

Press [PLAY] or [STOP] repeatedly for the desired channel number.

Then, press [F.FWD].

If you connected the VCR to a cable box or satellite box as in "Connect

VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel

as the CH3 or CH4 switch on the back of the VCR.

Then, select the channel you want to record at the cable box or satellite box.

Leave the cable box or satellite box on for timer recording.

Set the tape speed

Press [PLAY] or [STOP] repeatedly for the

desired tape speed.

Then, press [F.FWD].

• To go back one step, press [REW].

5 To set another program, repeat step [4]. To exit, press

[EXIT/RESET].

6 Press [POWER] to set the timer. The TIMER

indicator on the VCR comes on.

– 5 –

TIME SEARCH

2 : 50

PROGRAM NUMBER 4

DATE

- - / - -

START TIME - - : - -

- -

END

TIME - - : - -

- -

CHANNEL

- -

REC SPEED - -

PROGRAM NUMBER 4

ONCE

DAILY

WEEKLY

ONE TIME PROGRAM

PROGRAM NUMBER 4

DATE

05/13 MON

START TIME 07:30

END

TIME 08:30

CHANNEL

REC SPEED SP

SLP