Carlisle Binks 107760 서비스 매뉴얼 - 페이지 7

{카테고리_이름} Carlisle Binks 107760에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carlisle Binks 107760 17 페이지. Back pressure regulator

Outlet

Connect the unit into the paint system pipework in the direction indicated by the arrow

on the valve body.

Always connect the unit using the correct fittings /gaskets and if a threaded fitting is

used a suitable thread compatible sealant.

A pressure gauge should be mounted directly into the pipework on the inlet side of the

unit to allow precise adjustment for the regulated back pressure.

Alternatively, 1 off gauge connection port provided in the valve body can be used.

77-3247 R2.2

Installation

7/16

Inlet