Drayton T711R 주택 소유자 매뉴얼

{카테고리_이름} Drayton T711R에 대한 주택 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drayton T711R 2 페이지. Mitime programmer series single channe

페이지 인쇄
Drayton
HOMEOWNER Guide
MiTime
Programmer Series
TM
Single Channel
Model: T711R
What is a programmer?
... an explanation for householders
Programmers allow you to set 'On' and 'Off' time
periods. Some models switch the central heating and
domestic hot water on and off at the same time, while
others allow the domestic hot water and heating to
come on and go off at different times.
Set the 'On' and 'Off' time periods to suit your own
lifestyle. On some programmers you must also set
D ra yt
whether you want the heating and hot water to run
on
Mi Tim
e
continuously, run under the chosen 'On' and 'Off'
heating periods, or be permanently off.
The time on the programmer must be correct. Some
types have to be adjusted in spring and autumn at the
Technical Helpline: 0333 7000 622
changes between Greenwich Mean Time and British
Website: www.draytoncontrols.co.uk
Summer Time.
l
@DraytonControls
You may be able to temporarily adjust the heating
programme, for example, 'Override', 'Advance' or
x
/DraytonControls
'Boost'. These are explained in the manufacturer's
401 Southway Drive
instructions.
Plymouth
PL6 6QT
The heating will not work if the room thermostat has
United Kingdom
switched the heating off. Also, if you have a hot-water
cylinder, the water heating
EU Design Regs:- 002180638-1/2/3
will not work if the cylinder
User Guide 06490195001 Iss G
thermostat detects that the
hot water has reached the
correct temperature.
HOMEOWNER Guide
Step 2: Home Screen
Step 3: Prog. Timetable
Date
Zone = Heating
Now: describes the current status, e.g.
Link to Copy days
programme is On until 12:00am. Also links
to Programme timetable, see further details
in Step 3.
Timetable day range: Monday to
Friday (Week and weekend)
Options: Individual days (7day), Week and
Link to Settings, see further details in
Step 5.
weekend (5/2day), All week (24hr). The
available blocks depend on the selection
in menu "change timetable type"
Current mode: Auto
Options: see table below.
Help text: Use left/right buttons to
select the days you want to change
Press Select ( ) to view or edit mode
Arrow denotes that further options are
Mode:
Description:
available if you scroll down.
Auto
The programmer will control the
ON & OFF times in line with the
Period 1 settings: describes the current timetable
programmed timetable
settings, e.g. Heating has been programmed to
turn On at 6:30am and go off at 8:30am
Always Off
The selected zone will be OFF
Period 2 settings: describes the current timetable
Always On
The selected zone will be ON
settings, e.g. Heating has been programmed to
All Day
The programme will control the
turn On at 4:30pm and go off at 10:30pm
(first on / last
ON & OFF times in line with the
off)
programmed timetable, but using
Press select ( ) when highlighted to adjust
only the first ON event and the last
settings (see Step 4)
OFF event - it will remain ON in
Up to 4 periods can be programmed
between these two periods.
Step 1: Keys and Display
Single Channel: MiTime T711R
Dr ayt
on
MiTi me
Select key: Press to select highlighted
options, and to open and save editor screens
Step 4: Period Settings
Day range & period
Highlight shows adjustable field:
Use up/down buttons to adjust values
Period settings: On at 6:30am and Off
at 8:30am
Help text: Use left/right buttons to
change fields
Stored programmes
MiTime contains 3 pre-set programmes. An example
is shown below. These programmes can be modified
according to personal needs and can be stored by
using a name. Via this name they also can be reloaded.
Once a programme has been modified, the original
factory pre-set will no longer be available. On a
System Reset, only the current loaded programme will
be replaced with the factory setting – see Installation
Guide Step 3.
Programme 1
All week
Example:
Mon-Sun Mon-Fri
1st On
6:30am
1st Off
8:30am
2nd On
4:30pm
2nd Off
10:30pm
Date
Home key: Press to go back
to the home screen at any
time
Back key: Press to return to
the previous screen
Drayton
MiTime
This icon used
throughout these
instructions refers
to this button
Step 5: Additional User Settings
Feature:
Description:
Programme
On & Off times for the current period can be
Timetable
modified. See description in 'Step 3'
Copy days
Will copy the current day to one or more other days
Add Period
Adds a Time event. It will be added at the correct
position within the day. There is a maximum of 4
periods.
Remove Period
Removes the selected period. There needs to be at
least 1 period
Change
The visible day-blocks available in "programme
Timetable Type
timetable" can be defined, see Step 3.
Individual days
Each day can be programmed individually
Week and
Mon... Fri and Sat... Sun can be programmed as 2
weekend
blocks
All week
Mon...Sun can be programmed as one block
Stored
MiTime contains 3 pre-set programmes. These
programmes
programmes can be modified according to personal
needs and can be stored by using a name. Via this
name they can also be re-loaded. Once a programme
has been modified, the original factory pre-set will no
longer be available unless a System Reset is applied -
see Installation Guide Step 3.
Week & Weekend
Load stored
A pre-set programme can be loaded
programme
Sat-Sun
6:30am
7:00am
Save current
The current programme can be saved by name (Each
programme
pre-set program includes: Individual days, week/
8:30am
9:00am
weekend, all day and custom day schedules)
4:30pm
4:00pm
10:30pm 11:00pm
Home screen showing
current Mode, Status,
Programme timetable and
Settings link
Time
Factory Pre-Set:
Feature:
Description:
Help Tips
Describes the button functions
Holiday switch
In the period until holiday starts the product will operate normally. If holiday
off
is disabled manually or terminates automatically, the mode before start of
holiday will be re-instated.
An enabled holiday will be indicated with a suitcase symbol in the top line.
If holiday is active, in the Set: line the holiday end date will be indicated. In
the Summary screen the suitcase will be visible together with the holiday
temperature.
Status
Enable or disable holiday mode.
Holiday start
Set the time for the start of your holiday
time (From)
Holiday start
Set the date for the start of your holiday
date (From)
Default
Holiday end time
Set the time for the end of your holiday
(To)
Holiday end date
Set the date for the end of your holiday
Programme 1
(To)
Time and date settings
Set time
To set time of day
Set date
To set date
Daylight saving
To enable or disable daylight saving
Clock format
To select 12h or 24h clock mode
: Indicates a Service warning
: Indicates that holiday
is enabled
+hr key: Press from the
home screen to add up to 3
hours to the current period
Advance key: Press from the
home screen to advance to
the next on or off period
Help text to prompt for
next action. It relates to the
highlighted line
LED: Illuminates when zone
is scheduled to be ON
Arrow keys: Press to move
the highlight on screen, and
to change field values
Press Select to enter a specific
Setting. Options shown below:
Factory Pre-Set:
Disabled
Current time -
nearest hour
Today
Current time -
nearest hour
Today + 1 week
Factory set
Factory set
Enabled
12hr