Dražice OKC 200 NTRR / BP 운영 및 설치 매뉴얼 - 페이지 11

{카테고리_이름} Dražice OKC 200 NTRR / BP에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dražice OKC 200 NTRR / BP 13 페이지. Stationary water heaters
Dražice OKC 200 NTRR / BP에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (17 페이지), 작동 및 설치 매뉴얼 (12 페이지), 작동 및 설치 매뉴얼 (19 페이지), 작동 및 설치 매뉴얼 (20 페이지), 작동 및 설치 매뉴얼 (20 페이지), 작동 및 설치 매뉴얼 (18 페이지), 운영 및 설치 매뉴얼 (20 페이지), 작동 및 설치 매뉴얼 (18 페이지)

페이지 인쇄
Dražice OKC 200 NTRR / BP 운영 및 설치 매뉴얼
switches off the electric circuit and thus discontinues water heating. The control light signals if the element is in
operation (light is on) or if it is off (the light goes out). When putting the heater out of service for an extended
period, in winter you can set the thermostat to the "snowflake" symbol preventing the water from freezing, or turn
off the electricity supply to the heater. Connection, repairs, and wiring inspections may only be implemented by
company (person) authorised to such activity. Expert connection must be confirmed on the warranty certificate.
The heater is connected to the electric network using a solid moving conductor with a switch that turns off all
network poles and the circuit breaker (protector).
Installations in bathrooms, laundromats, rest rooms and showers, must obey ČSN 33 2000-7-701.
The degree of protection of electric parts of the heater is IP 44.
Respect rules of protection against electrical injuries in accordance with ČSN 33 2000-4-41.
Heating unit - flanges
OKCE 300 NTR/2,2 kW, OKCE 300 NTRR/2,2 kW
OKCE 160 NTR/2,2 kW, OKCE 200 NTR/2,2 kW,
OKCE 200 NTRR/2,2 kW, OKCE 250 NTR/2,2 kW,
OKCE 250 NTRR/2,2 kW
Fastening 8 x M10
Fastening 12 x M12
OKCE 300 NTR/3-6 kW, OKCE 300 NTRR/3-6 kW
Electric installation guard and wiring scheme
Fastening 12 x M12
Wiring scheme
Notice: Factory connection must not be changed!
Heating unit 2.2 kW
11