Alen A375 사용자 설명서 - 페이지 4

{카테고리_이름} Alen A375에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alen A375 13 페이지. Hepa
Alen A375에 대해서도 마찬가지입니다: 사용자 설명서 (7 페이지), 사용자 설명서 (14 페이지)

페이지 인쇄
Alen A375 사용자 설명서

USINg YoUR AIR PURIfIER

Operating Your Unit:

1.
Plug your air purifier into a grounded outlet.
2.
Press ON/OFF to start the air purifier. When your unit is on the control panel screen will
light up. To stop the air purifier press ON/OFF and the indicator light will turn off.
3.
Press SPEED and watch the indicator numbers until desired fan speed is achieved.
Fan Speed
Level 1
Level 2
Level 3
Level 4
Auto
4.
Press TIMER to have the air purifier automatically turn off in a set amount of hours. Up to
eight hours.
5.
Press IONIZER to activate the ozone safe built in ionizer. The built-in IONIZER charges
particles in the air. This causes the particles to stick together and become larger, making it
easier for the filter and cleaners to trap. Press IONIZER again to turn off.
6.
Filter replacement indicator — The A375 has a filter replacement indicator light that
illuminates when it is time for the filter to be changed.
7.
After changing the filter, RESET the filter indicator by holding down TIMER while the unit is
ON until the clean indicator light disappears.
8.
Press UV to activate the built-in ultraviolet lights. Press UV again to turn off.
9.
When on AUTO fan speed, the unit will adjust fan speed based on the level of dust or
smell. Dust and smell bars adjust horizontally as their respective levels change.
Result
Quietest operation
Basic cleaning power
Moderate cleaning power
Maximum cleaning power
AUTO fan speed, the unit will adjust fan speed based
on the level of dust or smell. Auto begins on level 1 and
if triggered will clean at level 4.
www.AlenCorp.com
1-800-630-2396
5